1/ Press the Prog button on the left of the Keylab near the pads
2/Then press the 4th contextual button underneath the screen to “Add New”
3/You’ll then be able to modify the name of the User program with the help of all the contextual buttons and the Jog wheel.
4/Once done press the 4th contextual button above the screen for “Ok”.
If you want the KeyLab to send different CCs, if you want to use relative mode on an encoder or have another color on a pad and many other things please try it like this - please note that this procedure will be only available on a User Program :
1/ Maintain Settings button + touch an encoder/fader/pad or press one of the 4 contextual buttons below the screen: a new menu should be displayed on the screen for the settings of this control.
2/ Use the Jog wheel to navigate between these settings, press it to access the value and turn it to change it. Press again to validate.
→ The same features are available also in the MIDI Control Center, please download with this link: https://www.arturia.com/technology/mcc
A pedal calibration option is available in the Settings. Just press the Settings button and the 4th contextual button, then please follow the instructions on the KeyLab’s screen.