Please find below a summary of all the available articles to properly setup your controller with your DAW on a per product basis:
In order to properly setup your KeyLab Essential, make sure to refer to the following dedicated article:
In order to properly setup your KeyLab Essential mk3, make sure to refer to the following dedicated article:
In order to properly setup your KeyLab MKII, make sure to refer to the following dedicated article:
In order to properly setup your KeyLab mk3, make sure to refer to the following dedicated article:
In order to properly setup your MiniLab3, make sure to refer to the following dedicated article:
Depending on your controller and your preferred DAW, you may sometimes end up in a situation where there may not be any available script to easily integrate your controller.
This is where MCU & HUI protocols can be useful to benefit from control surface features.
To activate the HUI/MCU protocol, you may have to go in the "Device Settings" of the MIDI Control Center, and choose between Mackie, HUI, or 'Both'.
You may of course have to possibly refer to your DAW Knowledge base or Manual to learn how to properly set-up your controller as a Control Surface with the help of the MCU / HUI Protocols.
Warning
If you choose 'Both' when using Reaper, and that you set your DAW to listen to MCU only, you'll encounter some issues.
To solve this issue with Reaper, simply pick between Mackie and HUI, instead of choosing 'Both'.
If you have any further questions, feel free to contact us.