Below, you will find a summary of the different procedures to resolve firmware update failures depending on your device and its update method.
Compatible devices:
Applies to all MiniLab and KeyLab products, Step & Brute ranges, MicroFreak & Spark controllers (Apart from AstroLab, check "Update failures via Analog Lab" & for PolyBrute, refer to "Update failures via PolyBrute Connect" sections below).
You will find detailed instructions on how to update the firmware and what to do in case of failure in the dedicated "Firmware update failure - What should i do?" section of the following article:
MIDI Control Center - Firmware Update
Compatible device:
MiniFreak
You will find detailed instructions on how to update the firmware and what to do in case of failure in the dedicated "Firmware update failure - What should i do?" section of the following article:
Compatible devices:
MiniLab 3, KeyLab MK3, KeyLab Essential MK3, AstroLab
If needed, you should be prompted to update the unit firmware when opening Analog Lab if the unit is not up to date.
If anything goes wrong with this process, you can refer to the "Update failures via Midi Control Center" section above to follow the alternative method and also refer to its dedicated "Firmware update failure - What should i do?" section to find further suggestions in case issues would still persist.
For AstroLab specific "Update procedure", refer to the following article:
If AstroLab update is failing, make sure to refer to this article and to its dedicated "AstroLab update fails" section:
Compatible devices:
PolyBrute, PolyBrute 12
You will find detailed instructions on how to update the firmware and what to do in case of failure in the dedicated "Firmware update failure - What should i do?" section of the following articles:
Compatible devices:
All MiniFuse products
You will find detailed instructions on how to update the firmware and what to do in case of failure in the dedicated "Firmware update failure - What should i do?" section of the following article:
Compatible devices:
All AudioFuse products apart from AudioFuse X8 IN & OUT
You will find detailed instructions on how to update the firmware and what to do in case of failure in the dedicated "Firmware update failure - What should i do?" section of the following article:
AudioFuse Control Center - General Questions
In order to update AudioFuse X8 IN and X8 OUT interfaces, make sure to refer to their dedicated FAQ articles as they require to follow a specific procedure:
AudioFuse X8 IN - Firmware Update
AudioFuse X8 OUT - Firmware Update
Notes
-Make sure to always try the firmware update process a few times if failing at first and to avoid using any USB extension cables or USB Hub.
-Make sure to also test different USB ports and if needed on another computer to confirm if the same issues are happening.
-In case you would be looking for the standard firmware update procedure, make sure to refer to the following article: